FasTagger II Lumber Tagging Stapler
You probably know that meeting UPC bar code requirements can be a job in itself. Manually stapling tags onto ends of lumber is not only time-consuming, but also tiring. That’s why Weber developed the improved FasTagger II end-tagger. The FasTagger II is a labeling system specially built for lumber mills and forestry product companies that combines a heavy-duty stapler with a label dispensing apparatus that allows one-handed end tagging of finished lumber.
Like FasTagger II’s predecessor, the original FasTagger, it’s the automatic tagging tool that dispenses Weber Poly Tags and staples them securely in place — all in one step.
The FasTagger II uses compressed air to apply tags at a rate of over 100 tags per minute. Your operator simply places the tool against the end of a piece of lumber and pulls the trigger. The FasTagger II automatically staples the tag to the lumber, cuts it, and then feeds the next tag into position. A special feed mechanism increases speed while decreasing chances for tag jam up.
Because it accepts four different Poly Tag sizes, the FasTagger II is versatile enough to handle a full range of bar code and product identification needs. You can use tags of two different widths (11/16″ and 7/8″) and two different lengths (1-3/8″ and 2-3/4″). The FasTagger II is designed to let you change tag length or tag width in less than ten seconds.
All of these features come in one compact tool weighing only 6.5 lbs. including a full roll of tags. It’s light enough to hold in one hand, yet durable enough to withstand the rough, outdoor environments found in lumber mills and treating plants.
Adobe Reader is required to open and view PDF files. This can be downloaded free from adobe.com.
Available Documents
Manual Label Dispensers
Manual Roll Dispensers MB Series: The essential dispenser for larger rolls of self adhesive labels where low volume application is required.
View ProductSustainable Labels
We offer a number of sustainable label products, including renewable films and papers, 100 percent post-consumer waste papers, dis-solvable and reputable papers, soy-based inks, and more. We believe that what is good for business can be better for the environment. We do not believe that being green has to cost more; no packaging professional should accept that. Here at Weber, we pledge to strive to develop products and process that improve our environment and our bottom line.
Legi-Air 4050 M Label printer and dispenser
Weber Packaging Solutions presents the Legi-Air 4050 M – a printing dispenser with a novel control concept. The “M” correspondingly stands for master controller: “The central hub for data and process control”.
View ProductBottle-Matic Label Applicators
Bottle-Matic bottle labelers enable you to label all kinds of products by simply inserting the container and depressing a foot-switch. Labels are applied at over 4.5” per second – most water bottles are labeled in less than two seconds. The operator then removes the bottle and inserts another to start the procedure again. These automated labeling systems make it easy to label wine bottles, craft beer bottles, water bottles and most other round products.
View Product
