XC4, XC6 – the GHS label printers for two-color printing

Two in-line arranged thermal transfer print units for simultaneous two-color printing in one label.

With ribbon saver at one print unit.

 

Label printer XC4
  • The XC series meets the conditions for the classification and labeling inventory according to GHS.
  • For large label rolls up to 300 mm diameter
  • The two print units including ribbon holder, operation panel and electronics are adopted from the proven A+ series
 1.9 Label printer XC4
Printable resolution dpi 300
Print width up to mm 105.6
Print speed up to mm/s 125
Label printer XC6
 1.10 Label printer XC6
Printable resolution dpi 300
Print width up to mm 162.6
Print speed up to mm/s 125

We are glad to assist you in the selection of proper ribbons.

Accessories for label printer XC series

Perforation and cutter

Cutter

Used to cut paper labels, self-adhesive labels, cardboard, textile or synthetic materials as well as heat shrink tubes.

Perforation cutter

For XC4 printers only. Enables the perforation of the material for later manual separation.

Stacker with cutter

Stacker with cutter

For XC4 printers only. Printed materials are cut and stacked. The print job is stopped as soon as the maximum stack height is reached. Even stiff or curved materials may be processed. We recommend to have your material tested at our facilities.

1. Wide graphic display

White backlight for optimum readability.

2. Ribbon holder

Simple, centered insertion of the ribbon with three-part tightening axles.

3. Simple adjustment

The print head is pressed down by toggles. One is mounted to the left label margin, the other is pushed to the right label margin.

4. Peripheral connection

All add-on modules are easy to connect. All peripheral devices are plugged in the printer using two pins and are fixed in place with a screw.

5. Solid metal housing

Die-cast aluminum. All components are mounted on it.

6. Roll holder

For labels up to a diameter of 300 mm. Swing lever and integrated brake make sure that the labels are unwound with constant tension.

7. Ribbon saver for printhead 1

The ribbon saver is used for labels to be partially printed. The print head is lifted within the unprinted area and the ribbon stopped during label feeding.

8. Fanfold guide

Fanfolded labels are positioned behind the print unit. Guide and additional brake ensure a reliable feeding to the print unit.

 

Adobe Reader is required to open and view PDF files. This can be downloaded free from adobe.com.

Available Documents

4 Reasons Pressure-Sensitive Labels are Best for Craft Beer Labelling

    Legi-Air 4050 M Label printer and dispenser

    legi-air-4050-m16

    Weber Packaging Solutions presents the Legi-Air 4050 M – a printing dispenser with a novel control concept. The “M” correspondingly stands for master controller: “The central hub for data and process control”.

    View Product

    IT1000 Universal Weighing Terminal

    Suitable for difficult environmental conditions and locations with high hygienic standards, as in the food, pharmaceutical and chemical industry. With mounting brackets for desktop or wall-mount installation.Integrated power supply unit, sealed cable glands for all cable connections.

    View Product

    ZE500R RFID PRINT ENGINE

    Performance leaders in mission-critical RFID printing applications, these reliable print engines with RFID technology empower you with an integrated solution for identifying packages, cases and pallets.  The ZE500R embeds a fully integrated ThingMagic RFID Reader/Encoder and supports the ability to print and encode short pitch item level tags, chip based serialization and block permalocking of user memory.

    View Product

    RF-Lite

    Low-cost offline coding system; ideal for companies looking to automate their date marking process for the first time.

    View Product

CTA Form