Geset 111 Top Labelling System

The Geset 111 labelling system is used to label square products on the top side automatically. Depending on the type and dimension of the product, different label sizes are used. The products are fed manually or by a conveying system provided by the customer at an infeed passage on the labelling system. Care should be taken on accurate alignment of the products. It is essential that the products are forwarded separately to the applicator with a gap between each other.

When the barrier is reached, an application trigger is tripped. The label applicator applies a label on the product in Wipe On procedure. The label on the top side is pushed on to the product by a brush or roller. After labelling, the products move on and can be removed from the conveyor by the customer.

Contact Us Download Brochure

      • Labelling at top side of square products.
    •  
      • Systems on rolls.
    •  
      • Robust steel base frame.
    •  
      • Simple unmistakable operation by buttons.
    •  
      • Speed of base conveyor can be adjusted by frequency converter.
    •  
      • Proven and reliable applicator technique provided by Alpha Compact, 120mmlabel width.
    •  
      • Performances of up to 100 products per minute are possible.

 

Adobe Reader is required to open and view PDF files. This can be downloaded free from adobe.com.

Available Documents

Geset 111 Instruction Manual
Geset 111 Technical Information
Geset 111 Computer Assisted Design

    ARMOR – Thermal Transfer Ribbon APR6

    THERMAL TRANSFER RIBBON

    APR®6 is the standard wax/resin ribbon of the ARMOR range: very versatile, it has been conceived to print all kinds of self-adhesive labels at the lowest heat settings. It also provides a higher level of mechanical resistance compared to the wax ribbons.

    View Product

    Armor APX 650 Thermal Tranfer Ribbon

    APX®650 is a high performance wax/resin ribbon for Corner Edge and Near Edge printers, providing a printing quality and mechanical resistance exceeding the market standards. These high performances contribute to secure your applications.

    View Product

    Legi-Air 5300 Tyre Label Printer-Applicator

    Fulfilling EU Guidelines

    According to an EU regulation all new tyres produced in or after January 2012 and placed on the market within the EU must bear a standardized EU label, such as those already seen on washing machines and refrigerators. The new label must contain precise details with seven grades (A-G) of fuel efficiency, wet grip and exterior noise when in motion (in dB), respectively.

    View Product

    Zebra FX7500 RFID Reader

    The FX7500 Fixed RFID Reader introduces advanced Zebra Solutions-designed RFID radio technology for faster, more accurate read rates and more consistent performance even in challenging environments. The new radio is paired with a more flexible Linux-based network architecture that integrates the tools and open-standard interfaces needed for fast, easy deployment with RFID and back-end applications. The result is a fixed RFID reader that sets a new performance standard — delivering peak performance at all times with excellent reader sensitivity and better interference rejection, at a lower cost per read point.

    View Product
CTA Form